Exposed-fastener panels are held down by screws with sealing washers.
| Framing | Screw |
|---|---|
| Wood purlins or decking | WOODGRIP screws, 1 in. or 1-1/2 in. |
| Metal purlins | Metal-to-metal screws, 1-1/4 in. |
Placement and count
Every panel maker publishes a fastener schedule for its profile: where the screws go (in the flat beside the rib or through the rib), how many per purlin, and the extra screws at eaves, ridge and panel ends. Follow the schedule for your panel, which we can send with your order, and order a few extra screws for waste. For background, see McElroy Metal’s tips for selecting and installing screws in metal roofing.
Tips
- Drive screws straight, snug but not overtightened, so the washer seals without deforming.
- Use color-matched screws for painted panels.
Order screws with your panels from your state page.